Performance is nothing without control
An enhanced version of the FLASH-LINK updater is now available and we're delivering a new updated version of the Windows FLASH-LINK Software to accompany it.
Several features and module options can now be customized with the FLASH-LINK menu. Simply point-and-click to enable or disable specific functionality preloaded in our data integration modules. This fine-grained control allows you to offer customized services to each of your customers, and provides you with the ability to up-sell a basic remote car starter or security installation with several different "add-on" features.
Disable any of the following features which are enabled by default:
- Door Locks - Door lock & unlock control.
- Trunk Release - Trunk / hatch release.
- Key Bypass - Immobilizer bypass.
- Heated Seats & Rear Defrost - Automatic low temperature heated seats & rear-defrost control.
- Foot-Brake Output - Foot-brake output.
- Hand-Brake Output - Hand-brake output.
- Door Trigger - Door trigger output.
- Trunk Trigger - Trunk / hatch trigger output.
- Hood Trigger - Hood trigger output.
- Auxiliary 1 - Vehicle specific function. (e.g. Right Sliding Door, Power Lift Gate)
- Auxiliary 2 - Vehicle specific function. (e.g. Left Sliding Door, Gas Cap Release)
Enable any of the following features which are disabled by default:
- Unlock/Lock (Disarm OEM Alarm) - Automatically unlock & disarm before remote-start and re-lock & re-arm after remote-start.
- Unlock Drivers Door Only - Simulate the OEM key-fob with driver's door priority unlock on 1st unlock signal. All doors unlock on 2nd unlock signal.
- Aftermarket alarm control via OEM remote - Monitor the vehicle's databus and synchronizes the remote car starter or security system with the OEM remote allowing the customer to use either remote.
- Engine-Start via OEM remote - Remote start the vehicle when the OEM remote's lock button is pressed 3x times. An aftermarket remote-starter not required.
The EVO-ALL and EVO-CAN (Hardware 3+) supports customized options. No Internet connection is required to enable or disable an option. Customizing an option will enable or disable both the analog wire and the respective data-link code. All options depend on the vehicle's available features.
The Essentials
What you need to get started
FLASH-LINK (Hardware 2+, Firmware 2.00+) is required. "FLASH LINK" & "FLASH-LINK-2" with firmware version 1.xx can not be updated and will need to be exchanged*. All previous FLASH-LINK versions should be exchanged with your distributor for an upgrade. Please contact your distributor for more details.
* FLASH-LINK (Hardware 2+, Firmware 2.00+) is self update-able. Once you have obtained the latest version of FLASH-LINK any future firmware updates will no longer require an exchange.
Windows Software (Version 2.00) is required. Click on "Help" > "Flashlink Firmware Update" to update automatically, or follow the link below to install the latest version manually.
Related Articles
Review: MotoMaster Hydra Edge Plus all-season
Formula DRIFT Opens 2026 Season in Long Beach with Shanahan Victory
Chevy Camaro to return in 2028?
Canon Becomes Formula DRIFT’s Official Imaging Partner for 2026 Season
Meguiar’s and TJ Hunt Set to Unveil Ferrari 488 GT3 EVO Livery at Formula DRIFT Long Beach
Hyundai unveils body-on-frame Boulder SUV Concept
