乐播传媒

A must have for any tuner enthusiast 鈥� the air intake system. All engines regardless of size and manufacturer require three ingredients for combustion: air, fuel and spark. Thus, increasing the airflow into an engine via an intake system will result in greater performance (horsepower), better throttle response and that signature suction noise.

Below, is a step-by-step explanation on how the KIA Forte Koup went from breathing through a metaphorical straw to this full air intake system provided by Turbokits.com

Preparation:

- Slide Outerwears pre-filer sleeve over intake filter

Step 1: Remove rubber hose connected to the air box pipe
- Carefully loosen and remove the rubber hose connected to the air box pipe.

- Next, slide off all clips around the air box

Step 2: Remove top portion of the air box unit

- Carefully wiggle the top portion of the air box unit and remove it along with the air filter inside it.

Step 3: Remove two (2) 10mm bolts securing intake feeder

Step 5: Install ECU bracket

- As part of the intake kit, a bracket is supplied to fasten the ECU unit securely. Use the supplied hardware consisting of three (3) nuts / bolts to secure the ECU to the bracket and tighten.

Step 6: Mount ECU unit with bracket in the factory position.

Step 8: Drop in intake aluminum pipe mating one end (with the breather end) to the throttle body and the other end tucked behind the left fog light.

Step 9: Apply the two (2) pieces of reflective heat tape to the radiator hose just under the intake pipe.

*Note: This step is not mandatory, but highly recommended.

Step 10a: Tighten all clamps

Step 10b: Install air hose (PCV vent) from the intake to the valve cover (male to male ends)

Step 11: Life vehicle to access splash shield, remove bolts covering the plastic undercarriage panel and move aside.

Step 12: Fit air filter onto aluminum intake pipe

Step 14: Re-assemble splash shield

Step 15: Test for secure fitment and that no pieces are loose. Start engine and rev a few times to assure that install does not interfere with any other parts of the vehicle.

听

Related Articles

Review: MotoMaster Hydra Edge Plus all-season

If you want to test a tire designed for wet grip, rain is essential. And at this time of year in Southern Ontario, there鈥檚 usually a lot of it. Such...

Formula DRIFT Opens 2026 Season in Long Beach with Shanahan Victory

Round 1 of the 2026 Formula DRIFT PRO Championship took place April 11 on the Streets of Long Beach, with Conor Shanahan taking the win in the Final...

Chevy Camaro to return in 2028?

We鈥檒l admit we were excited when we saw a flurry of headlines recently suggesting Chevy鈥檚 departed muscle car might return in a couple of years. Then...

Canon Becomes Formula DRIFT鈥檚 Official Imaging Partner for 2026 Season

Canon U.S.A. has officially joined the Formula DRIFT paddock as the series鈥� new Official Imaging Partner through a two-year agreement beginning with...

Meguiar鈥檚 and TJ Hunt Set to Unveil Ferrari 488 GT3 EVO Livery at Formula DRIFT Long Beach

Meguiar鈥檚 is bringing something special to the opening round of the 2026 Formula DRIFT PRO Championship this weekend in Long Beach, California. The...

Hyundai unveils body-on-frame Boulder SUV Concept

Sometimes the name says it all. A fine example is the Hyundai Boulder Concept, a big, rugged, body-on-frame SUV that was unveiled on the eve of the...