乐播传媒

From factory the KIA Forte packs a decent punch, however there is never any harm in bumping up the horsepower while making some beautiful noise thanks to an aftermarket exhaust upgrade.

Below, is a step-by-step explanation on how the KIA Forte Koup went from having a nice exhaust note to something fierce, thanks to a TurboKits.com dual-tip cat-back exhaust system.

Tools:
- 19mm Socket

- Ratchet

Preparation:
- Line up parts for the exhaust system and check for necessary hardware in package.

Step 1: Prepare vehicle for lifting

- Get car positioned for the hoist

- If car is too low for the hoist arms, raise the back end with a jack

Step 2: Remove two (2) rear muffler bolts

- Loosen muffler bolts and dislodge muffler

- Remove hangers from rubber bushing

Step 3: Remove two (2) bolts behind the catalytic converter

- Using the 19mm socket and ratchet, remove the two (2) bolts holding the catalytic converter to the mid-pipe.

- Remove two (2) rubber hangers and drop the mid-pipe

Step 4: Test fit all exhaust pieces

- Place all exhaust pieces together and test fit and secure using rubber bushings.

Step 5: Installing the TurboKits mid-pipe

- Install the TurboKits mid-pipe using the two (2) original bolts and flange gasket from the factory exhaust system.

- Mount the two (2) mid-pipe hangers into the factory original location and hand tighten (for now).

Step 6: Installing the TurboKits muffler

- Install the TurboKits muffler by securing the two (2) hangers to the rubber bushings.

Step 7: Installing the mid-pipe extension

- Install the mid-pipe extension between the mid-pipe and muffler by connecting the flanges together at back and the exhaust clamp at front.

Step 8: Secure exhaust install

- Line up all the exhaust pieces and tighten with 19mm socket and ratchet, assuring that no piece is able to move.

Step 9: Test fit dual exhaust tips

- Place dual exhaust tips over muffler exit and adjust until there is enough clearance from the rear bumper.

- Use the provided clamp and tighten with ratchet until secure.

With the KIA Forte Koup boasting a new titanium-looking dual tip exhaust system, start the engine and let it run so that the heat from the exhaust gas will tighten any possible gaps between the new pieces and flanges.

Related Articles

Formula DRIFT Super Drift Delivers Two Days of Action in Long Beach

Formula DRIFT鈥檚 Super Drift Challenge returned to the Streets of Long Beach during the Acura Grand Prix weekend, delivering two days of condensed,...

Review: MotoMaster Hydra Edge Plus all-season

If you want to test a tire designed for wet grip, rain is essential. And at this time of year in Southern Ontario, there鈥檚 usually a lot of it. Such...

Formula DRIFT Opens 2026 Season in Long Beach with Shanahan Victory

Round 1 of the 2026 Formula DRIFT PRO Championship took place April 11 on the Streets of Long Beach, with Conor Shanahan taking the win in the Final...

Chevy Camaro to return in 2028?

We鈥檒l admit we were excited when we saw a flurry of headlines recently suggesting Chevy鈥檚 departed muscle car might return in a couple of years. Then...

Canon Becomes Formula DRIFT鈥檚 Official Imaging Partner for 2026 Season

Canon U.S.A. has officially joined the Formula DRIFT paddock as the series鈥� new Official Imaging Partner through a two-year agreement beginning with...

Meguiar鈥檚 and TJ Hunt Set to Unveil Ferrari 488 GT3 EVO Livery at Formula DRIFT Long Beach

Meguiar鈥檚 is bringing something special to the opening round of the 2026 Formula DRIFT PRO Championship this weekend in Long Beach, California. The...